At MHz this resulted in a superpi time of roughly seconds at lowest latency’s. Gigabyte International Overclocking Tournament. HR-0 plus performs good but I’m thinking about modifying one of my waterblocks so that it fits on this gigabyte mainboard. I need to come up with some else. Set this pin to “1” via a pull-up resistor to disable it, vice versa will enable it.
|Date Added:||23 August 2013|
|File Size:||28.56 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Gigabyte Overclocking Qualification Round 1. UTJC-8 has a likewise pinout datasheet: Gigabyte International Overclocking Tournament. Contact Us – Madshrimps – Top.
Gigabyte Open Overclocking Championship Page 1 of 4. HR-0 plus performs good but I’m thinking about modifying one of my waterblocks so that it fits on this gigabyte mainboard.
It appears you have not yet registered with our community. I allready tweaked the memory latency here. This unit allows up to 11,5V, I’m not that crazy so I went up to 4,5V maximum but I did not found the board to become more stable at MHz mode.
Set this pin to “1” via a pull-up resistor to disable it, vice versa will enable it. At this speed the system was terrible slow compared to systems running s5mm MHz and Alladin 5 chipset.
Desoldered the LXA and added an external circuit based on a 5A switching power regulator. A lot of software tweaking this time, sometimes you get awefull result and then without reason you get a fast superpi run. My findings My findings about this board: I can get sub ambient temps 5V too, when I back down the cpu speed I can let the system run for several minutes without overheating, passively cooled that is. What’s going on here?
You must power off the system first, a quick reboot was not enough so it seems. Can not be turned of by hardware BIOS.
Original GIGABYTE SIS530 Ga-5smm Dual ISA Slot Motherboard
I need to come up with some else. Unfortunately CPUCool is not working for me.
Maxmem tweak helped a lot. The time now is I was also able to match the performance of the GA5-SMM with that of the M, which is nice considering the fact that the Sis is one of the slower chipsets, and it has half amount of L2 cache too.
Last edited by geoffrey: I need the high FSB speed despiratly as it is the only way to the beat the competition. To register please 5sm here It ran through superpi stable at 3V but the time was really terrible, nearly doable as slow as compared to competitors on hwbot.
At MHz this resulted in a superpi time of roughly seconds at lowest latency’s. My findings about this board: No software can read the FSB bus speed but it is working for sure.
Gigabyte Technology GA-5SMM, Socket 7 Motherboard | eBay
Modifying this part on the mobo allowed my to alter VCC3 up to 3,7V which made the 5smmm go up to MHz front side bus. Originally Posted by geoffrey. New goal would be to get x3 MHz stable but I recon that is very hard to do without exhautic phase change cooling.