This equipment generates, uses and can radiate radio frequency. For beginners in overclock field, BET had developed an easy, fast, and powerful feature to increase the system performance, named A. CPU fan is rotated normally. After confirmed, please follow steps below to relief the CPU protection function. RAID 0 defines a disk striping scheme that improves disk read and write times for many applications.

Uploader: Arasar
Date Added: 17 June 2009
File Size: 48.89 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 61991
Price: Free* [*Free Regsitration Required]

Remove AC power a6990g-m2. The following figures are only for reference, the screen printed in this user manual will change according to your motherboard on hand.

Check cable running from disk to drive, can be booted from optical drive. This completes the installation.

Graphic 1 will appear when activating this utility. Further the vendor reserves the a690gg-m2 to revise this publication and to make changes to the contents here without obligation to notify any party beforehand. Every read and write bilstar actually carried out in parallel across 2 disk drives in a RAID 1 array system.

Floppy Disk Connector The motherboard provides a standard floppy disk connector that supports K, K, 1. Make sure both ends are securely plugged in; check the drive type in the standard CMOS setup.


Always disconnect the computer from power outlet before operation. Then system will do fail-safe reboot by using Watchdog function.

Power on the AC. Driver Installation To install the driver, please click on the Driver icon. Insert the floppy disk and reboot the system to get into CMOS screen.

Power on the vg again. Execute the setup execution file, and then the following dialog will pop up. If the testing fails, system will do a fail-safe rebooting. This function will protect CPU from overheat problem and maintain the system temperature biostaf a safe level.

PCI-Express supports a raw bit-rate of 2. This function allows user to adjust CPU voltage. Before you start installing the motherboard, please make sure you follow the instructions below: This column shows the CPU speed information.


Users can set the upper and lower limit by adjusting to monitor the CPU operating voltage. CPU Overheated If the system shutdown automatically after power on system for seconds, that means the CPU protection function has been activated. Hardware Monitor Panel Click the Hardware Monitor button in Main Panel, the button will be highlighted and the Hardware Monitor panel will show up as the following figure.


This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. In this panel, you can get model name and detail information in hints of all the chipset that a690gm2 related to overclocking.

This connector supports the provided floppy drive ribbon cables. The size of each biotar is determined by the stripe size parameter, which you set during the creation of the RAID set based on the system environment. This is an on-board Power Switch button. The information will be refreshed every 1 second. Before you take the motherboard out from anti-static bag, ground yourself properly by touching any safely grounded appliance, or use grounded wrist strap to remove the static charge.

Biostar A690G-M2 Setup Manual

Don’t have an account? This technique reduces overall disk access time and offers high bandwidth. There is a waveform to represent the status of CPU temperature.